Chevrolet Tahoe 2021 Owner's Manual
![Chevrolet Tahoe 2021 manual cover](/images/EpznICjtdKWEItwzQMdGXJmb/thumbs/thumb175x175.webp)
To connect your smartphone, enable Bluetooth on your device, access the infotainment system menu, select 'Phone', then 'Pair Device'. Follow the on-screen instructions to complete the pairing process.
The recommended tire pressure for the Chevrolet Tahoe 2021 is typically 35 PSI for both front and rear tires. Refer to the sticker located on the driver’s side door jamb for exact specifications.
To reset the oil life indicator, turn the ignition to the 'On' position without starting the engine. Use the steering wheel controls to navigate to the 'Oil Life' menu, then press and hold the 'OK' or 'Reset' button until the indicator resets to 100%.
Chevrolet recommends using SAE 0W-20 full synthetic engine oil for the 2021 Tahoe for optimal performance and protection.
To enable the hands-free liftgate, ensure the key fob is within range, then make a kicking motion under the rear bumper where the sensor is located. The liftgate should open automatically.
If the check engine light illuminates, check for any loose gas cap or obvious issues. If the light persists, schedule a diagnostic check with a certified Chevrolet service center.
To update the navigation system, visit the official Chevrolet website to check for available updates. Follow the instructions to download the update to a USB drive, then insert it into the vehicle’s USB port to begin the installation.
The Chevrolet Tahoe 2021 has a maximum towing capacity of up to 8,400 pounds when properly equipped. Verify your specific vehicle's configuration for exact towing capabilities.
To improve fuel efficiency, maintain regular service intervals, keep tires properly inflated, drive at steady speeds, and avoid excessive idling. Removing unnecessary weight can also help.
To replace the cabin air filter, open the glove box and remove any contents. Detach the dampener cord and push in the sides of the glove box to release it. Remove the filter cover and replace the old filter with a new one, ensuring proper orientation. Reassemble in reverse order.