Chevrolet SS 2016 Owner's Manual
![Chevrolet SS Sedan 2016 manual cover](/images/WznTakOmpIFWGWXRUZnrTaPe/thumbs/thumb175x175.webp)
To reset the tire pressure monitoring system, turn the ignition to the 'ON' position without starting the engine. Press and hold the 'Tire Pressure' button located on the dash until the TPMS indicator blinks twice. This indicates that the system has been reset.
The 2016 Chevrolet SS Sedan is recommended to use SAE 5W-30 full synthetic engine oil for optimal performance and protection. Always check the owner's manual for any specific requirements.
To pair your smartphone, go to the 'Settings' menu on the MyLink screen, select 'Bluetooth', then 'Pair Device'. On your phone, enable Bluetooth and select 'Chevrolet MyLink' from the list of available devices. Follow any additional prompts to complete the pairing process.
A squealing noise when braking is often caused by worn brake pads. It's advisable to have the brakes inspected and replaced if necessary to ensure safety and prevent damage to the rotors.
The recommended tire pressure for the 2016 Chevrolet SS Sedan is typically 35 psi for both front and rear tires. However, always refer to the sticker on the driver's side door jamb for the manufacturer's specifications.
To change the cabin air filter, open the glove box and remove the limiting arm. Press in on the sides of the glove box to release it from the dashboard. Remove the filter cover by unclipping it, then replace the old filter with a new one, ensuring the airflow arrows are pointing in the correct direction.
The check engine light can be triggered by a variety of issues, including a loose gas cap, faulty oxygen sensor, or an issue with the catalytic converter. It's best to use an OBD-II scanner to read the diagnostic trouble codes or visit a professional mechanic for an accurate diagnosis.
For the 2016 Chevrolet SS Sedan, it is generally recommended to replace the spark plugs every 60,000 miles. However, always consult the vehicle’s maintenance schedule for specific intervals.
To perform a factory reset on the MyLink system, go to 'Settings', then 'Return to Factory Settings'. Select 'Restore Vehicle Settings' and confirm your selection. This will reset the system to its default settings.
If the air conditioning is not blowing cold air, check the refrigerant level first as it might be low. Also, inspect the AC compressor and fuses. If the problem persists, it is recommended to consult a professional technician for a thorough diagnosis.