Chevrolet Malibu 2021 Owner's Manual

To reset the tire pressure monitoring system, turn the ignition to the "On" position without starting the engine. Press the "Menu" button on the turn signal lever until the "Tire Pressure" screen appears. Press and hold the "Set/CLR" button until a confirmation message appears.
The recommended engine oil for the 2021 Chevrolet Malibu is SAE 5W-30 full synthetic oil. Always refer to the owner's manual for the correct oil specifications.
To improve fuel efficiency, ensure regular maintenance such as oil changes and air filter replacements. Maintain proper tire pressure, avoid excessive idling, and use cruise control on highways when appropriate.
To pair your smartphone, enable Bluetooth on your phone. On the Malibu's infotainment screen, select "Phone", then "Pair Device". Follow the on-screen instructions and confirm the pairing on your smartphone.
The check engine light can be triggered by various issues, such as a loose gas cap, faulty oxygen sensor, or emissions problems. Use an OBD-II scanner to retrieve error codes or consult a professional mechanic for diagnosis.
To replace the key fob battery, remove the key from the fob. Use a flathead screwdriver to gently pry apart the fob. Replace the old battery with a new CR2032 battery, ensuring the positive side faces up. Reassemble the fob.
The recommended tire pressure for the 2021 Chevrolet Malibu is typically 35 psi for both front and rear tires. Always check the sticker inside the driver's door for the exact specifications for your vehicle.
It is generally recommended to change the air filter every 15,000 to 30,000 miles, depending on driving conditions. Check the filter during regular maintenance and replace it if it appears dirty or clogged.
If the battery dies, you can jump-start the vehicle using jumper cables and another car. Connect the positive cable to the positive terminals and the negative cable to the negative terminal on the working battery and a ground point on the Malibu. Start the working car, then the Malibu.
To engage the parking brake, press the brake pedal and then pull up on the electronic parking brake switch located in the center console. To release, press the brake pedal and push down on the switch.