Chevrolet Malibu 2010 Owner's Manual

Chevrolet Malibu 2010 manual cover
Pages 450
Year 2010
Language(s)
English en

Chevrolet Malibu 2010 Specification

The 2010 Chevrolet Malibu is a midsize sedan that offers a blend of style, comfort, and performance. It is available in four trims: LS, 1LT, 2LT, and LTZ. Powering the Malibu is a choice of two engines: a 2.4-liter Ecotec inline-4 engine that produces 169 horsepower and 160 lb-ft of torque, and a more powerful 3.6-liter V6 engine that generates 252 horsepower and 251 lb-ft of torque. Both engines are paired with a six-speed automatic transmission that delivers smooth and efficient gear shifts.

The exterior design of the Malibu features a sleek and aerodynamic profile with a distinctive front grille and angular headlamps. Inside, the cabin offers a spacious and comfortable environment with high-quality materials and an intuitive layout. Standard interior features include air conditioning, power windows and locks, and a six-speaker audio system with CD/MP3 playback and an auxiliary input. Higher trims add amenities such as leather upholstery, heated front seats, a premium eight-speaker audio system, and Bluetooth connectivity.

Safety is a priority in the 2010 Malibu, which comes equipped with a range of features including anti-lock brakes, traction control, stability control, and a suite of airbags including side curtain airbags. The Malibu also features OnStar, providing automatic crash response, turn-by-turn navigation, and roadside assistance.

Fuel efficiency is commendable, with the 2.4-liter engine achieving an EPA rating of 22 mpg in the city and 33 mpg on the highway, while the V6 engine offers 17 mpg in the city and 26 mpg on the highway. Overall, the 2010 Chevrolet Malibu is a well-rounded vehicle that caters to a variety of driving needs with its blend of performance, comfort, and safety features.

Chevrolet Malibu 2010 F.A.Q.

How often should I change the oil in my Chevrolet Malibu 2010?

For optimal performance, it is recommended to change the oil every 3,000 to 5,000 miles, depending on your driving conditions and oil type. Always refer to your owner’s manual for the manufacturer's recommendations.

What type of transmission fluid should I use for a Chevrolet Malibu 2010?

The Chevrolet Malibu 2010 typically uses DEXRON-VI automatic transmission fluid. Always check your owner’s manual to confirm the correct type for your specific model.

How do I reset the tire pressure monitoring system (TPMS) light on my Chevrolet Malibu 2010?

To reset the TPMS light, ensure all tires are properly inflated, then turn the ignition to the "ON" position without starting the engine. Press and hold the TPMS reset button (usually located under the steering wheel) until the TPMS light blinks twice. Drive the vehicle for about 20 minutes to complete the reset.

What is the recommended tire pressure for a Chevrolet Malibu 2010?

The recommended tire pressure for the Chevrolet Malibu 2010 is typically 30-35 psi for all four tires. Always refer to the sticker on the driver's side door jamb or the owner's manual for the exact specifications.

How do I replace the headlight bulb on a Chevrolet Malibu 2010?

To replace the headlight bulb, open the hood and locate the back of the headlight assembly. Remove the electrical connector and the rubber dust cover. Turn the old bulb counterclockwise and pull it out. Insert the new bulb, replace the dust cover, and reconnect the electrical connector.

What could cause my Chevrolet Malibu 2010 to overheat?

Overheating can be caused by several issues such as a low coolant level, a faulty thermostat, a malfunctioning radiator fan, or a clogged radiator. It's important to have these components checked to prevent engine damage.

How do I jump-start a Chevrolet Malibu 2010?

To jump-start the vehicle, position another car with a good battery close to your Malibu. Connect the positive jumper cable to the positive terminal of the dead battery and the other end to the positive terminal of the good battery. Connect the negative cable to the good battery's negative terminal and the other end to a metal ground on the dead car. Start the working vehicle, then the Malibu.

What is the procedure for changing the air filter on a Chevrolet Malibu 2010?

To change the air filter, open the hood and locate the air filter housing. Unclip or unscrew the housing cover, remove the old air filter, and insert the new filter. Ensure it is seated correctly, then reattach the housing cover.

What are common causes of a check engine light in a Chevrolet Malibu 2010?

Common causes for the check engine light include a loose gas cap, faulty oxygen sensor, catalytic converter issues, or mass air flow sensor failure. An OBD-II scanner can help diagnose the specific issue.

How can I improve the fuel efficiency of my Chevrolet Malibu 2010?

To improve fuel efficiency, ensure regular maintenance such as oil changes and air filter replacements, maintain proper tire pressure, reduce excess weight in the car, and drive conservatively by avoiding rapid acceleration and heavy braking.