Chevrolet Captiva Sport 2015 Owner's Manual

To reset the oil change light, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal slowly three times within 10 seconds. The light should reset, and you can confirm by turning the ignition off and then starting the engine.
The recommended tire pressure for the Chevrolet Captiva Sport 2015 is typically 35 PSI for both front and rear tires. Always check the owner's manual or the label inside the driver's door for the most accurate information.
To connect your phone via Bluetooth, enable Bluetooth on your phone and set it to discoverable. On the car's infotainment system, select "Phone" > "Pair Device." Follow the prompts to complete pairing and confirm any passcodes if prompted.
The Chevrolet Captiva Sport 2015 typically requires SAE 5W-30 engine oil. It's advisable to use oil that meets the dexos1 specification for optimal performance and protection.
To replace the headlight bulb, open the hood and locate the back of the headlight assembly. Remove the cover and disconnect the electrical connector. Twist the bulb counterclockwise to remove it, then replace it with a new bulb by reversing these steps.
If the check engine light illuminates, check for any obvious issues such as a loose fuel cap. If the light remains on, it's best to have the vehicle diagnosed by a professional to identify any potential engine or emissions issues.
To replace the cabin air filter, open the glove box and remove the limiting arm on the right side. Push in on the sides of the glove box to release it from the dashboard, revealing the filter cover. Open the cover and replace the old filter with a new one, ensuring the airflow direction is correct.
The towing capacity for the Chevrolet Captiva Sport 2015 is approximately 1,500 pounds. Ensure the trailer is properly hitched and that you adhere to all weight limits specified in the owner's manual to maintain safe towing practices.
It is generally recommended to change the transmission fluid every 45,000 to 60,000 miles. However, consult your owner's manual for specific intervals and consider more frequent changes if the vehicle is used for heavy towing or in extreme conditions.
To program a new key fob, insert the existing key into the ignition and turn it to the "ON" position. Turn it back to "OFF" and remove it. Within 10 seconds, insert the new key and turn it to "ON." The vehicle should recognize the new fob. Consult the manual for detailed steps if needed.