Chevrolet Avalanche 2012 Owner's Manual
![Chevrolet Avalanche 2012 manual cover](/images/fBxVxeLlyOGdlnnskGuupWSk/thumbs/thumb175x175.webp)
Turn the ignition to the "ON" position without starting the engine. Press the "DIC" button until the "Oil Life Remaining" message is displayed. Press and hold the "SET/RESET" button until the oil life percentage resets to 100%.
The recommended tire pressure for the 2012 Chevrolet Avalanche is 30 PSI for both front and rear tires. Check the door placard or owner's manual for more details.
Check if the A/C compressor is engaging. Inspect the refrigerant levels and ensure there are no leaks. Verify that the cabin air filter is not clogged. If the problem persists, consult a professional technician.
Check to ensure the gas cap is tightened properly. If the light remains on, use an OBD-II scanner to read the error codes. Address any specific issues indicated by the codes or take the vehicle to a qualified mechanic.
It is recommended to replace the spark plugs every 100,000 miles under normal driving conditions. Always refer to the owner's manual for the most accurate maintenance schedule.
The towing capacity of the 2012 Chevrolet Avalanche is approximately 8,100 pounds when properly equipped. Always verify with the owner's manual and ensure the vehicle is configured correctly for towing.
Open the hood and locate the back of the headlight assembly. Remove the electrical connector from the bulb. Twist the bulb counterclockwise to remove it. Insert the new bulb and reattach the connector.
Poor fuel economy can result from under-inflated tires, dirty air filters, or a malfunctioning oxygen sensor. Regular maintenance and addressing any engine issues promptly can improve fuel efficiency.
The 2012 Chevrolet Avalanche typically requires SAE 5W-30 engine oil. Always check the owner's manual for the recommended oil type and viscosity.
Turn on the vehicle and enable Bluetooth on your phone. Access the Bluetooth settings on the vehicle's infotainment system and select "Pair Device." Follow the prompts to complete the pairing process.