Carrier 38AUD Installation Manual

To reset the Carrier 38AUD unit after a power outage, turn off the power to the unit at the circuit breaker, wait for about 5 minutes, and then turn it back on.
It is recommended to schedule maintenance for the Carrier 38AUD unit twice a year, preferably before the cooling and heating seasons, to ensure optimal performance.
To improve energy efficiency, regularly clean or replace air filters, ensure proper sealing of ducts, and schedule regular maintenance checks.
Check if the thermostat is set correctly, ensure the air filters are clean, and inspect the outdoor unit for any debris or obstructions. If the issue persists, contact a professional technician.
To clean the outdoor coils, disconnect power to the unit, remove debris with a soft brush, and use a garden hose to gently wash off any dirt. Avoid using high pressure to prevent damage.
A blinking LED indicator typically signifies an error or fault. Refer to the user manual for the specific error code and suggested troubleshooting steps.
Yes, a programmable thermostat can be used with the Carrier 38AUD to enhance comfort and energy savings by automatically adjusting the temperature settings.
Locate the filter compartment, remove the old filter, and insert a new filter of the same size. Ensure the arrows on the filter point in the direction of the airflow.
Unusual noises may indicate loose parts, debris in the fan or motor issues. Turn off the unit and inspect for visible problems. Contact a professional technician for further inspection if needed.
Ensure proper airflow by keeping filters clean, maintaining the recommended refrigerant levels, and checking that the outdoor unit is free from obstructions.