Contents

Revision and Copyright Information
Limited Warranty
Assistance
Safety
Table of Contents
1. Introduction
2. Precautions
3. Initial Inspection
4. QuickStart
5. Overview
6. Specifications
- 6.1 Operating Range
- 6.2 Accuracy
- 6.3 General
7. Installation
- 7.1 Jumper Settings
- 7.2 Mounting in the Enclosure
- 7.3 Wiring
  - 7.3.1 Data Logger Connection
  - 7.3.2 5-pin Screw Terminal Plug Connector
- 7.4 Programming
  - 7.4.1 CRBasic Instructions
8. Operations
- 8.1 Multiplier and Offset Calculation
- 8.2 Conversion Factors
- 8.3 Long Cable Lengths
- 8.4 Output Resolution
- 8.5 Correcting Pressure to Sea Level
9. Maintenance and Calibration
Appendix A. Importing Short Cut Code Into CRBasic Editor
Appendix B. Example Programs
- B.1 CR1000X Program Using Sequential Mode
- B.2 CR1000X Program Using Pipeline Mode
Campbell Scientific Regional Offices

Campbell Scientific CS106 Product Manual

Campbell Scientific CS106 Sensor manual cover

Pages 22

Year 0

Language(s)

of 22

Campbell Scientific CS106 Sensor Specification

The Campbell Scientific CS106 is a precision pressure sensor designed for a range of meteorological and environmental monitoring applications. It operates based on a Vaisala BAROCAP capacitive silicon sensing element, which ensures high accuracy and long-term stability in measuring barometric pressure. The CS106 measures pressure within a range of 500 to 1100 hPa, making it suitable for most weather applications. Its accuracy is ±0.3 hPa over a temperature range of -40°C to +60°C, providing reliable data in diverse environmental conditions.

The sensor operates with a supply voltage ranging from 9.6 to 28 VDC and consumes minimal power, making it ideal for remote or solar-powered installations. The CS106 outputs a linear analog voltage signal, which can be measured by a variety of Campbell Scientific dataloggers, ensuring seamless integration into existing data acquisition systems.

The CS106 is housed in a robust, weather-resistant enclosure, offering protection against harsh environmental conditions. Its compact and lightweight design facilitates easy installation and maintenance. The sensor's compatibility with Campbell Scientific's renowned data loggers enhances its functionality, allowing users to configure and calibrate the sensor through the same platform.

In summary, the Campbell Scientific CS106 is a highly reliable and accurate pressure sensor that excels in performance and ease of integration, making it an excellent choice for professionals in meteorology, climatology, and environmental research. Its precision, durability, and compatibility with sophisticated data logging systems make it a preferred instrument for those requiring dependable atmospheric pressure readings.

Campbell Scientific CS106 Sensor F.A.Q.

How do I calibrate the Campbell Scientific CS106 Sensor?

To calibrate the CS106 Sensor, follow the manufacturer's calibration procedure outlined in the user manual, typically involving a comparison against a known reference. Ensure the sensor is in a stable environment and connected properly to the data logger.

What is the recommended maintenance schedule for the CS106 Sensor?

Perform a maintenance check every 6 months, including cleaning the sensor, inspecting cables for wear, and recalibrating if necessary. This keeps the sensor functioning accurately.

How can I troubleshoot inaccurate readings from my CS106 Sensor?

First, check all electrical connections and ensure the sensor is properly grounded. Verify that the sensor is calibrated and not exposed to electromagnetic interference. If the issue persists, consult the troubleshooting section in the user manual.

Can the CS106 Sensor be used in extreme weather conditions?

Yes, the CS106 Sensor is designed to operate in a wide range of environmental conditions, but it is important to ensure it is properly shielded and mounted according to the installation guidelines to prevent damage.

What is the correct method to install the CS106 Sensor?

Install the CS106 Sensor vertically in an area free from obstructions. Use the supplied mounting brackets and ensure that the sensor is level and securely attached. Refer to the installation guide for detailed instructions.

How do I connect the CS106 Sensor to a data logger?

Connect the sensor's output cable to the appropriate channels on the data logger, matching the wiring diagram provided in the manual. Configure the data logger to read the sensor's output accurately.

What should I do if the CS106 Sensor does not power on?

Check the power supply and connections to ensure they are secure. Inspect the power cable for any signs of damage. If the sensor still does not power on, contact technical support for further assistance.

Is the CS106 Sensor compatible with all Campbell Scientific data loggers?

The CS106 Sensor is compatible with most Campbell Scientific data loggers, but it is advisable to check the compatibility list in the sensor's documentation or consult with a Campbell Scientific representative.

How often should the CS106 Sensor be recalibrated?

Recalibrate the sensor at least once a year, or more frequently if used in harsh environments or if data accuracy is critical. Follow the calibration procedures outlined in the manual.

What are the typical applications for the CS106 Sensor?

The CS106 Sensor is commonly used for atmospheric pressure measurements in meteorological, environmental, and agricultural applications. It provides reliable data for weather stations and research projects.