Cadillac XTS 2015 Convenience & Personalization Guide
![Cadillac XTS 2015 manual cover](/images/QfJKEKXOMFSPehiwKvQAcAmZ/thumbs/thumb175x175.webp)
To reset the oil life indicator on the Cadillac XTS 2015, turn the ignition to the "ON" position without starting the engine. Use the steering wheel controls to navigate to the "Oil Life" menu on the Driver Information Center. Press and hold the "SEL" button until the display shows 100%.
The recommended tire pressure for the Cadillac XTS 2015 is typically 35 PSI for both front and rear tires. Always check the specifications in the owner's manual or on the sticker inside the driver's door for the most accurate information.
To pair your phone with the Cadillac XTS 2015 Bluetooth system, go to the "Settings" menu on the CUE system and select "Bluetooth." Ensure Bluetooth is enabled on your phone, then select "Pair Device" on the CUE screen and choose your phone from the list. Enter the PIN displayed on the screen to complete pairing.
The check engine light on your Cadillac XTS 2015 can illuminate for various reasons, such as a loose gas cap, faulty oxygen sensor, or an issue with the catalytic converter. It's recommended to use an OBD-II scanner to read the diagnostic trouble codes (DTCs) for a precise identification of the issue.
To replace the cabin air filter in a Cadillac XTS 2015, open the glove box and remove the damper cord. Press inward on both sides of the glove box to release it from its mounts. The cabin air filter cover is located behind the glove box. Remove the cover and replace the old filter with a new one, ensuring it is oriented correctly.
The recommended oil type for the Cadillac XTS 2015 is SAE 5W-30 full synthetic oil. It is essential to use oil that meets the GM dexos1 specification for optimal performance and engine longevity.
To update the navigation system in your Cadillac XTS 2015, visit the official Cadillac navigation website to purchase the latest map updates. Follow the provided instructions to download the updates to a USB drive, then insert the drive into your vehicle's USB port and follow the on-screen prompts to complete the update.
A squealing noise when braking may indicate that the brake pads are worn and need replacement. It could also be due to dust or debris caught between the brake pad and rotor. It's advisable to have your brakes inspected by a professional to determine the exact cause.
To jump-start the Cadillac XTS 2015, park a working vehicle close by and turn off both vehicles. Connect the red positive cable to the positive terminal of the dead battery, then to the positive terminal of the good battery. Connect the black negative cable to the negative terminal of the good battery, then attach the other end to an unpainted metal surface on the engine block of the dead vehicle. Start the working vehicle, then the XTS. Remove the cables in reverse order once the XTS is running.
If the key fob for your Cadillac XTS 2015 is not working, first try replacing the battery inside the fob. If it still doesn't work, try reprogramming the key fob by following the instructions in the owner's manual. If both methods fail, contact a Cadillac dealer for further assistance.