Cadillac XTS 2014 Convenience & Personalization Guide
![Cadillac XTS 2014 manual cover](/images/CoyefNoJlOXYfhjpjQKYiPbr/thumbs/thumb175x175.webp)
To reset the oil change light, turn the ignition to the "On" position without starting the engine. Use the DIC (Driver Information Center) controls to navigate to "Oil Life" and then press and hold the "Set/Reset" button until the oil life resets to 100%.
The 2014 Cadillac XTS typically requires synthetic oil with a viscosity of 5W-30. Always refer to the owner's manual for the manufacturer's recommendations.
First, try resetting the system by turning off the vehicle, opening and closing the driver's door, and then restarting the vehicle. If the issue persists, check the fuses related to the infotainment system and consult the owner's manual or a professional technician.
The recommended tire pressure for the 2014 Cadillac XTS is typically around 35 PSI for both front and rear tires. Always check the tire placard located on the driver's side door jamb for the most accurate specifications.
To replace the key fob battery, remove the key by pressing the release button. Open the fob using a flathead screwdriver or a coin in the small groove. Replace the old battery with a new CR2032 battery, ensuring the correct polarity, and snap the fob back together.
Check the battery connections for corrosion and ensure they are tight. If the battery is charged and the connections are good, consider checking the starter and ignition system or consult a professional mechanic for further diagnosis.
Insert the new key fob into the key fob slot, usually located in the center console or glove box. With the vehicle in the "Run" position, use the DIC to navigate to the "Remote Learn" section and follow the prompts to program the new fob.
Regular maintenance for the 2014 Cadillac XTS includes oil changes every 7,500 miles, tire rotations every 7,500 miles, and brake inspections every 15,000 miles. Refer to the owner's manual for a comprehensive maintenance schedule.
Connect the positive cable to the positive terminal of the dead battery, then to the positive terminal of the good battery. Connect the negative cable to the negative terminal of the good battery, then to a metal ground on the dead vehicle. Start the assisting vehicle, then the XTS.
To update the navigation system, visit the Cadillac navigation update website to purchase the latest map update. Follow the provided instructions to install the update via USB or SD card in the vehicle's infotainment system.