Cadillac XT4 2022 Convenience & Personalization Guide
![Cadillac XT4 2022 manual cover](/images/GhHzsnajPmxYaDZNgXgQzWOX/thumbs/thumb175x175.webp)
The recommended tire pressure for the Cadillac XT4 2022 is typically 32 psi for both front and rear tires. However, always check the owner’s manual or the label inside the driver’s door for the exact specifications.
To reset the oil life monitor, press the MENU button on the turn signal lever until "Remaining Oil Life" is displayed. Press and hold the SET/CLR button until the display shows 100%.
The Cadillac XT4 2022 has a towing capacity of up to 3,500 pounds when properly equipped with the towing package.
To pair your phone, go to the "Phone" option on the infotainment screen, select "Pair Device," and follow the on-screen instructions. Ensure Bluetooth is enabled on your phone and select the Cadillac XT4 from the list of available devices.
The Cadillac XT4 2022 typically requires SAE 5W-30 engine oil that meets GM dexos1 specifications. Always refer to the owner’s manual for confirmation.
To activate adaptive cruise control, press the cruise control button on the steering wheel and then use the toggle to set your desired speed. Adjust the gap between your vehicle and the one ahead using the gap setting button.
If the check engine light comes on, first ensure the gas cap is tight. If the light remains, it is advisable to have the vehicle diagnosed at a certified Cadillac service center to determine the underlying issue.
To update the navigation system, visit the Cadillac website or contact a dealer for the latest map updates. Updates can often be installed via USB or over-the-air if the vehicle is equipped with this capability.
The Cadillac XT4 2022 typically follows a maintenance schedule that includes oil and filter changes every 7,500 miles, tire rotations, and regular inspections. Refer to the owner’s manual for a detailed schedule.
To replace a headlight bulb, first turn off the vehicle and open the hood. Locate the headlight assembly and remove the cover. Disconnect the wiring harness and remove the old bulb. Insert the new bulb, reconnect the wiring, and replace the cover. Consult the owner's manual for detailed instructions.