Cadillac Escalade 2020 Convenience & Personalization Guide

To reset the oil life indicator, turn the ignition to the "On" position without starting the engine. Use the arrow keys on the steering wheel to navigate to the "Oil Life" menu on the dashboard display. Press and hold the "Check" or "OK" button until the oil life resets to 100%.
The 2020 Cadillac Escalade is designed to run on premium unleaded gasoline with an octane rating of 91 or higher for optimal performance.
First, ensure that Bluetooth is enabled on your phone. Then, on the Escalade's infotainment screen, go to "Phone" > "Pair Device". Select your phone from the list of available devices and confirm the pairing code shown on the screen matches the one on your phone.
The recommended tire pressure for the 2020 Cadillac Escalade is typically 35 psi for both the front and rear tires. However, always refer to the label located on the driver's side door jamb for exact specifications.
To replace the cabin air filter, open the glove box and remove the limiting arm by sliding it off the pin. Push in the sides of the glove box to release it from the dashboard. Locate the cabin air filter cover, remove the screws, and replace the old filter with a new one. Reassemble in reverse order.
The check engine light can illuminate for various reasons, ranging from a loose gas cap to more serious engine issues. It's best to use an OBD-II scanner to retrieve the diagnostic trouble codes or visit a professional mechanic for a thorough inspection.
To enable the rear entertainment system, press the "Power" button on the rear screen. You can control content from the front infotainment system or use a compatible device. Ensure that the system is powered on and that headphones or speakers are connected for audio.
At 30,000 miles, it's recommended to inspect the brake system, replace the engine air filter, check the cooling system, and perform a tire rotation. Refer to the owner's manual for a detailed maintenance schedule.
To adjust the head-up display, use the controls located to the left of the steering wheel. You can adjust the brightness, vertical position, and the information displayed using these controls.
If the battery dies, you can jump-start the Escalade using jumper cables and another vehicle. Connect the cables in the correct order: positive to positive and negative to a metal ground. Start the assisting vehicle, then your Escalade. Let it run for a few minutes before disconnecting the cables.