Cadillac CT6 2019 Convenience & Personalization Guide

To connect your smartphone via Bluetooth, first ensure Bluetooth is enabled on your device. Then, on the CT6 infotainment system, go to Settings > Bluetooth and select 'Pair New Device'. Follow the prompts on your phone to complete the pairing process.
If the infotainment system is unresponsive, try restarting it by holding down the power button for about 10 seconds. If the problem persists, check for any software updates or consult your dealership for further assistance.
The recommended oil change interval for the Cadillac CT6 2019 is every 7,500 miles or 12 months, whichever comes first. However, consult your owner's manual for specifics related to your driving conditions.
The Cadillac CT6 2019 is designed to run on premium unleaded gasoline with an octane rating of 91 or higher for optimal performance.
To reset the TPMS, first ensure all tires are inflated to the recommended pressure. Then, use the vehicle's system interface to navigate to the tire pressure menu and follow the prompts to reset. Consult the owner's manual for detailed instructions.
To replace a headlight bulb, turn off the vehicle and open the hood. Locate the back of the headlight assembly, remove the dust cover, and disconnect the power connector. Remove the old bulb and install the new one, ensuring it is securely seated. Reattach the connector and dust cover before closing the hood.
The Cadillac CT6 2019 has a sealed transmission, which means it does not have a traditional dipstick for checking fluid levels. It is recommended to have the transmission fluid checked by a professional mechanic during regular maintenance.
The check engine light can illuminate for various reasons, such as a loose gas cap, faulty oxygen sensor, or more serious engine issues. It's best to have the vehicle diagnosed with an OBD-II scanner to determine the specific cause.
To enable adaptive cruise control, first ensure the vehicle is traveling at the desired speed. Then, press the cruise control button on the steering wheel and use the set button to activate. Adjust the following distance using the gap setting button.
For extended storage, clean the vehicle thoroughly, fill the gas tank, and add a fuel stabilizer. Inflate the tires to the recommended pressure, disconnect the battery, and cover the vehicle to protect it from dust or debris.