Buick Encore GX 2021 Owner's Manual

The recommended tire pressure for the Buick Encore GX 2021 is typically 35 PSI for both front and rear tires. However, always check the sticker on the driver's side door jamb for the most accurate information.
To reset the oil life monitor, turn the ignition to the "On" position without starting the engine. Then, press the "Menu" button until the "Remaining Oil Life" screen appears. Press and hold the "Set/Clr" button until the confirmation message appears, then select "Yes" to reset.
The Buick Encore GX 2021 is recommended to use SAE 5W-30 full synthetic oil. Always refer to the owner's manual for specific oil specifications and approvals.
To connect your smartphone, enable Bluetooth on your phone, then on the infotainment screen, go to the "Phone" section, select "Pair Device," and follow the prompts to complete the pairing process.
If the check engine light illuminates, ensure the gas cap is tight as a loose cap can trigger the light. If the light remains on, have the vehicle checked by a certified technician as soon as possible.
To enable or disable the auto stop/start feature, locate the "A" button with a circular arrow around it on the center console. Press the button to toggle the feature on or off, as indicated by the light on the button.
The Buick Encore GX 2021 has a towing capacity of up to 1,000 pounds when properly equipped. Always consult the owner's manual for detailed towing specifications and guidelines.
To replace the cabin air filter, locate the filter housing behind the glove box. Remove the glove box by releasing the dampers and removing the screws, then take out the old filter and insert a new one, ensuring the airflow direction matches the arrows on the filter.
To jump-start the vehicle, connect the positive cable to the positive terminal of your battery, and the other end to the positive terminal of the donor battery. Then, connect the negative cable to the negative terminal of the donor battery, and the other end to a metal ground on your vehicle, away from the battery. Start the donor vehicle, then your Buick Encore GX.
To program a new key fob, use an existing key to turn the ignition to the "On" position, then off. Insert the new key within 5 seconds and turn to "On." The system will signal successful programming. Consult the owner's manual for detailed instructions.