Buick Encore 2018 Owner's Manual

To reset the oil life monitor, turn the ignition to the "On" position without starting the engine. Press the "MENU" button on the turn signal lever until "Remaining Oil Life" is displayed. Press and hold the "SET/CLR" button until it resets to 100%.
The recommended oil for the 2018 Buick Encore is SAE 5W-30 full synthetic motor oil. Always check your owner's manual for any specific requirements or updates.
To improve fuel efficiency, ensure regular maintenance like air filter replacements, keep tires properly inflated, drive at moderate speeds, and avoid unnecessary idling.
The recommended tire pressure for the 2018 Buick Encore is typically 35 psi for both front and rear tires. Check the placard on the driver's side door jamb for exact specifications.
To connect your smartphone, activate Bluetooth on your phone and on the car's infotainment system. Navigate to "Settings" > "Bluetooth" on the car's display, select "Pair Device," and choose your phone from the list. Enter the PIN if prompted.
The check engine light can illuminate for various reasons, including a loose gas cap, faulty oxygen sensor, or engine misfire. Use an OBD-II scanner to read error codes or consult a professional mechanic.
To replace the cabin air filter, open the glove box, remove the retaining arm and lower it. Locate the cabin filter cover, unclip it, and replace the old filter with a new one. Ensure it's installed in the correct airflow direction.
Uneven tire wear may be caused by improper tire pressure, misaligned wheels, or worn suspension components. Regularly inspect and maintain your tires and suspension system to prevent this issue.
To update the navigation system, visit the Buick website or your dealership's service department for the latest map updates. Follow the instructions provided to install updates via USB or SD card.
If the key fob isn't working, replace the battery with a new one. If it still doesn't work, try reprogramming the fob or consult a Buick dealer for further assistance.