Bostitch SB-100SX Operation and Maintenance Manual

Pages 30

Year 0

Language(s)

of 30

Bostitch SB-100SX Stapler Specification

The Bostitch SB-100SX Stapler is a sophisticated pneumatic tool designed for efficiency and precision in fastening applications. Powered by compressed air, it delivers consistent performance, making it ideal for professional use in construction and carpentry. The stapler is engineered to drive staples ranging from 1/2 inch to 1 inch in length, offering versatility for various tasks. Its lightweight yet robust aluminum construction ensures durability while minimizing user fatigue during prolonged use. The tool features a sequential trigger system, enhancing safety by allowing staples to be driven only when the nose is depressed against a work surface. This stapler includes a convenient bottom-load magazine which facilitates quick and easy reloading, reducing downtime on the job site. The magazine has a capacity to hold up to 100 staples, optimizing workflow efficiency. An adjustable depth guide is incorporated to allow precise control over staple penetration, ensuring consistent results across different materials and applications. The SB-100SX is equipped with a rear exhaust port that directs air away from the user, enhancing comfort and cleanliness during operation. Additionally, the stapler includes a swivel air fitting that permits greater maneuverability and flexibility, preventing air hose tangling. With its compact design and reliable performance, the Bostitch SB-100SX Stapler is an essential tool for professionals demanding accuracy, speed, and ease of use in their fastening operations.

Bostitch SB-100SX Stapler F.A.Q.

How do I load staples into the Bostitch SB-100SX Stapler?

To load staples, pull back on the magazine release latch, slide the magazine out, insert the staples with the points facing down, and slide the magazine back until it clicks into place.

What should I do if the Bostitch SB-100SX Stapler jams?

First, disconnect the stapler from the air supply. Open the magazine and remove any jammed staples. Inspect for damage and reload the staples properly before reconnecting the air supply.

How often should I oil the Bostitch SB-100SX Stapler?

It is recommended to apply a few drops of pneumatic tool oil into the air inlet before using the stapler each day to ensure smooth operation and longevity.

What size staples are compatible with the Bostitch SB-100SX Stapler?

The Bostitch SB-100SX Stapler is compatible with 1/2-inch to 1-inch 18 gauge staples. Verify the staple size against your project requirements.

Why is my Bostitch SB-100SX Stapler not firing?

Ensure the stapler is connected to an adequate air supply. Check for jams, ensure the trigger is responsive, and verify that the magazine is properly loaded.

How can I adjust the depth of drive on the Bostitch SB-100SX Stapler?

The depth of drive can be adjusted by turning the depth control dial located near the trigger. Rotate the dial clockwise for deeper staple penetration and counter-clockwise for shallower depth.

What maintenance is required for the Bostitch SB-100SX Stapler?

Regular maintenance includes oiling daily, checking for worn or damaged parts, cleaning the magazine and nosepiece, and ensuring connections are tight and secure.

How do I safely disconnect the Bostitch SB-100SX Stapler from the air supply?

To safely disconnect, first release any remaining air pressure by pressing the trigger. Then, detach the air hose from the stapler to avoid accidental discharge.

What is the recommended air pressure for operating the Bostitch SB-100SX Stapler?

The recommended air pressure for optimal performance is between 70 and 120 psi. Ensure your compressor is set within this range to avoid stapler damage.

Can I use the Bostitch SB-100SX Stapler for upholstery projects?

Yes, the Bostitch SB-100SX Stapler is suitable for upholstery projects. Ensure you use the appropriate staple size for the material and adjust the depth of drive accordingly.