Bostitch N400C-1 Operation and Maintenance Manual

Pages 16

Year 0

Language(s)

of 16

Bostitch N400C-1 Nailer Specification

The Bostitch N400C-1 Nailer is a robust, high-performance pneumatic tool designed for heavy-duty industrial applications, such as pallet assembly, fencing, and framing. It operates using a coil-fed system, accommodating 1-1/2 inch to 4 inch wire collated nails, which enhances efficiency by reducing the frequency of reloads. The tool features a magnesium housing that ensures durability while maintaining a lightweight profile, minimizing user fatigue during prolonged use.

This nailer operates at a pressure range of 70 to 120 PSI, providing consistent power for driving nails into dense materials. The N400C-1 includes an adjustable exhaust that directs air away from the user, enhancing comfort and safety on the job site. A tool-free depth adjustment feature allows for precise control over nail depth, catering to various project requirements without the need for additional tools.

The nailer also incorporates a rubber grip that enhances user comfort and control, reducing the risk of slippage during operation. Its contact trip trigger mechanism ensures safety by requiring the nose of the tool to be depressed before nails are fired, preventing accidental discharge. The Bostitch N400C-1 is engineered for reliability, with components that are easy to access for maintenance, thus prolonging the tool's lifespan and reducing downtime.

Overall, the Bostitch N400C-1 Nailer is an ideal choice for professionals seeking a dependable and efficient solution for demanding nailing tasks, combining power, versatility, and user-friendly features to meet the needs of various industrial applications.

Bostitch N400C-1 Nailer F.A.Q.

How do I load nails into the Bostitch N400C-1 Nailer?

To load nails into the Bostitch N400C-1 Nailer, first disconnect the tool from the air supply. Open the magazine by sliding the latch and pulling it back. Insert the coil of nails into the magazine, ensuring that the nails are aligned properly. Close the magazine and reconnect the air supply.

What should I do if the nailer is not firing nails?

If the Bostitch N400C-1 Nailer is not firing nails, check if the air pressure is within the recommended range of 70-120 PSI. Ensure that the magazine is properly loaded and that there are no jammed nails. If the issue persists, inspect the trigger and contact Bostitch customer service for further assistance.

How do I clear a jam in the Bostitch N400C-1 Nailer?

To clear a jam, disconnect the nailer from the air supply. Open the magazine and remove any visible jammed nails. Use needle-nose pliers if necessary to carefully remove stuck nails. Reinsert the nails, close the magazine, and reconnect the air supply before resuming work.

What type of maintenance does the Bostitch N400C-1 Nailer require?

Regular maintenance for the Bostitch N400C-1 includes cleaning the magazine and feed area, checking for worn or damaged parts, and lubricating the O-rings with pneumatic tool oil. It's also important to inspect and replace any damaged seals or gaskets.

Can I use the Bostitch N400C-1 Nailer for hardwood applications?

Yes, the Bostitch N400C-1 Nailer is capable of handling hardwood applications. Ensure that you use the correct nail type and adjust the air pressure accordingly to achieve optimal results without damaging the material.

What safety precautions should I take when using the Bostitch N400C-1 Nailer?

Always wear safety glasses and ear protection when using the nailer. Ensure that the work area is clear of bystanders, and never point the nailer at yourself or others. Disconnect the tool from the air supply when not in use or when performing maintenance.

How do I adjust the depth of drive on the Bostitch N400C-1 Nailer?

To adjust the depth of drive, locate the depth adjustment control on the nailer. Turn the adjustment wheel or knob to increase or decrease the depth as needed. Test the setting on a scrap piece of material to ensure the desired depth is achieved.

What is the recommended air pressure for operating the Bostitch N400C-1 Nailer?

The recommended air pressure for operating the Bostitch N400C-1 Nailer is between 70 and 120 PSI. Ensure that your air compressor is set within this range to prevent damage to the tool and ensure proper nail driving performance.

How can I prevent nails from jamming in the Bostitch N400C-1 Nailer?

To prevent nails from jamming, regularly clean the magazine and feed path to remove debris. Use high-quality nails and ensure they are the correct size and type for the tool. Properly adjust the air pressure and maintain the tool as recommended.

What should I do if the Bostitch N400C-1 Nailer is leaking air?

If the nailer is leaking air, check all seals and gaskets for wear or damage. Replace any damaged parts. Ensure all connections are tight and that the tool is properly lubricated. If the issue continues, contact Bostitch customer support for further assistance.