Bostitch FN16250K-2 Operation and Maintenance Manual

Pages 32

Year 0

Language(s)

of 32

Bostitch FN16250K-2 Nailer Specification

The Bostitch FN16250K-2 Nailer is a versatile and robust tool designed for precision and efficiency in finish carpentry applications. This pneumatic nailer is engineered to drive 16-gauge straight finish nails, with lengths ranging from 1-1/4 inches to 2-1/2 inches, making it ideal for a variety of tasks such as crown molding, baseboards, and cabinetry. The tool features a magnesium body, ensuring lightweight durability and reducing user fatigue during extended use. It operates at a pressure range of 70 to 120 PSI, providing sufficient power for both delicate and more demanding tasks. The FN16250K-2 is equipped with a tool-free adjustable depth guide, allowing users to quickly and easily set the desired nail depth and enhance work precision. A no-mar tip is included to protect work surfaces from dents and scratches, maintaining the integrity of fine workpieces. The nailer also incorporates a tool-free jam release mechanism, minimizing downtime and keeping productivity high by allowing for quick clearing of nail jams. For added convenience, the rear exhaust directs air away from the user, maintaining comfort during operation. The ergonomic design features a comfortable grip handle, enhancing control and reducing hand strain. This model is compatible with standard air compressors and includes a durable carrying case for protection and easy transport. The Bostitch FN16250K-2 Nailer is a reliable choice for professionals seeking a high-performance finish nailer that delivers consistent results in a range of carpentry applications.

Bostitch FN16250K-2 Nailer F.A.Q.

How do I load nails into the Bostitch FN16250K-2 Nailer?

To load nails, first disconnect the tool from the air supply. Open the magazine by sliding the magazine release latch and insert a strip of compatible nails. Ensure the nails are seated properly and close the magazine securely.

What should I do if the Bostitch FN16250K-2 Nailer jams?

Disconnect the nailer from the air supply. Open the magazine and remove any jammed nails. Clear the jam by removing any debris or obstructions. Reload nails and test the tool carefully.

How often should I lubricate my Bostitch FN16250K-2 Nailer?

It is recommended to add a few drops of pneumatic tool oil to the air inlet before each use or after every couple of hours of continuous use to ensure optimal performance.

What air pressure is required for the Bostitch FN16250K-2 Nailer?

The operating air pressure for the Bostitch FN16250K-2 Nailer is between 70 to 120 psi. Refer to user manual for specific requirements based on the task and materials.

How do I adjust the depth of drive on the Bostitch FN16250K-2 Nailer?

Use the depth adjustment control located near the trigger to adjust the depth of drive. Turn it clockwise for deeper penetration and counterclockwise for shallower penetration.

Can I use the Bostitch FN16250K-2 Nailer for framing work?

The Bostitch FN16250K-2 is a finish nailer, best suited for trim and molding work rather than heavy-duty framing. For framing, a framing nailer is recommended.

What safety precautions should I take when using the Bostitch FN16250K-2 Nailer?

Always wear safety goggles and hearing protection. Ensure the tool is disconnected from the air supply when not in use and when performing maintenance. Keep fingers away from the trigger when not firing.

How do I clear a double feed issue in the Bostitch FN16250K-2 Nailer?

Disconnect from the air supply and open the magazine to remove any nails. Check for any obstructions in the nose area and clear them. Reload nails properly and test the tool.

What type of nails can be used with the Bostitch FN16250K-2 Nailer?

The Bostitch FN16250K-2 Nailer is designed for use with 16-gauge finish nails ranging from 1-1/4 inches to 2-1/2 inches in length.

How can I prevent air leaks in my Bostitch FN16250K-2 Nailer?

Regularly inspect O-rings and seals for wear and replace them if necessary. Ensure that all connections are tight and leak-free. Use only clean, dry air and proper lubrication.