Bose ProFlight Aviation Quick Start Guide

Please read and keep all safety and use instructions.

PROFLIGHT AVIATION HEADSET

Insert the AA batteries (2) into the control module.

A. Place the headset on your head.

B. Adjust the headband so the side pads rest above your ears.

On the control module, press the Power button I.

NOTE:For Dual plug only. For 5-pin XLR, 6-pin Lemo, and 7-pin XLR, the headset powers on automatically when connected to aircraft power.

Insert the aircraft connector into the aircraft control panel.

A. Locate the left T and right U icons on the headband to orient the headset properly.

B. Rotate the side pads into position.

5-pin XLR 6-pin Lemo 7-pin XLR

Microphone

Intercom/audio

Dual plug

a b c

e f g

On the control module, press the Power button I.

NOTE:For Dual plug only. For 5-pin XLR, 6-pin Lemo, and 7-pin XLR, the headset powers on automatically when connected to aircraft power.

Connect your mobile device.

Power button

A. Insert the earbuds.

B. Tilt the earbuds back, and tuck the wing under the ear ridge until the fit is secure.

NOTE:Medium tips are attached. Refer to the owners guide for more information on proper fit.

Adjust the microphone so it is 0.5" (12.7 mm) from your lips and the white surface is facing your mouth.

b c d

f g h

2018 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM802340-0030 Rev. 00

Acoustic Noise Cancelling functions High Maximum quiet and noise cancellation across the entire spectrum.

Best signal to noise ratio for radio and intercom communications.

Medium Optimized mode for quieter aircraft.

Low Best for interpersonal communication outside of the intercom.

NOTE:To set noise cancellation to Low on a single earbud, set the Tap Control switch to On, and firmly double-tap the earbud.

Bluetooth audio priority Mute When an intercom signal is detected, mobile device audio is

temporarily muted until intercom audio ceases.

Mix When an intercom signal is detected, mobile device audio is mixed with intercom audio.

Off Only intercom audio is active. Bluetooth functionality is disabled.

Operation switches Reserved Reserved for future use.

Auto on Power on automatically when connected to aircraft power.

Aircraft audio Set sensitivity/volume of intercom audio.

Intercom Process audio as mono or stereo.

Auto off Power off automatically after 3 to 45 minutes of inactivity.

Tap