BOOMco Twisted Spinner CHM20 Instruction Manual
![BOOMco Twisted Spinner CHM20 Toy manual cover](/images/fKapGcRPirLeWeXAHVLzDVhn/thumbs/thumb175x175.webp)
To load the BOOMco Twisted Spinner CHM20, first open the rotating barrel by pulling it forward. Insert the darts into each chamber, ensuring they are securely in place. Close the barrel by pushing it back into position until it clicks.
If darts are not firing properly, check that the darts are correctly loaded and not damaged. Ensure the barrel is fully closed and locked. Clear any obstructions from the barrel or firing mechanism.
Regularly clean the barrel and firing mechanism with a dry cloth to remove debris. Inspect darts for wear and replace if necessary. Store the toy in a cool, dry place to prevent damage.
For better accuracy, ensure you are using undamaged darts and that they are loaded correctly. Practice aiming and familiarize yourself with how the toy handles. Consistent practice will help improve accuracy.
Check if the barrel is obstructed by any foreign objects. Ensure that the barrel is properly aligned and securely attached. If the problem persists, consult the instruction manual or contact customer support.
For optimal performance, it is recommended to use BOOMco brand darts specifically designed for the Twisted Spinner CHM20, as other brands may not fit properly or may cause damage.
Always wear eye protection when using the toy. Do not aim at eyes or face. Ensure the play area is clear of obstacles and other people. Only use darts designed for this toy.
If the toy does not click when cocked, ensure that the cocking mechanism is fully engaged. Check for any obstructions or damage to the cocking mechanism. Consult the manual if necessary.
Regularly clean the barrel and inspect darts for damage. Ensure that the darts are being loaded correctly. If jams continue, check for internal obstructions or consult the manual for further troubleshooting steps.
Store the toy in a cool, dry place, away from direct sunlight. Keep it unloaded and ensure that all moving parts are in their resting position to avoid unnecessary tension on the mechanisms.