Beko WTL92151W User Manual

To start a basic wash cycle, first load your laundry into the drum. Add detergent to the appropriate compartment in the detergent drawer. Close the door securely. Use the program knob to select the desired wash cycle, then press the start/pause button to begin the cycle.
If the washing machine is not draining, check the drain hose for kinks or blockages. Ensure the filter is clean and clear of debris. Also, verify that the pump is functioning correctly. If the problem persists, consult the user manual or contact a service professional.
Ensure the washing machine is level by adjusting its feet. Avoid overloading the drum, and make sure the laundry is evenly distributed inside. Consider using anti-vibration pads under the feet for additional stability.
Regularly clean the detergent drawer and the door seal to prevent mold build-up. Check and clean the filter every few months. Run an empty hot wash cycle with a washing machine cleaner to remove residue. Ensure the drum and hoses are free from obstructions.
Ensure the washing machine is plugged in and switched on. Check if the door is closed securely. Verify that the start/pause button has been pressed firmly. Examine the power supply and circuit breaker. If the issue persists, contact customer support.
Check if the selected program has an adequate spin speed. Ensure the load is not too large or imbalanced. If necessary, run an additional spin cycle. Verify that the filter and drain hose are not blocked.
Run an empty cycle with a washing machine cleaner or a mixture of vinegar and baking soda. Regularly clean the door seal and detergent drawer. Leave the door open after each wash to allow the drum to dry and prevent odors.
Error code "E03" indicates a drainage issue. Check the drain hose for blockages, ensure the filter is clean, and verify that the pump is operating correctly. If the error persists, contact a qualified technician for assistance.
Yes, the Beko WTL92151W has a specific wool program designed for delicate fabrics. Ensure to use a suitable detergent for wool and follow the care label instructions on your garments.
Locate the filter cover at the bottom front of the machine. Open the cover and place a tray underneath to catch any water. Unscrew the filter cap and remove it. Clean any debris from the filter, then replace and secure it back into position.