Beko WTL72051S User Manual

To start a wash cycle, first load your laundry and add detergent. Then, select the desired program using the control knob and adjust any settings as needed. Press the start button to begin the wash cycle.
Check if the drain hose is kinked or blocked. Ensure the filter is clean and free of debris. If the problem persists, consider checking the pump for obstructions.
It is recommended to clean the detergent drawer every month to prevent detergent build-up and ensure optimal performance.
The maximum load capacity for the Beko WTL72051S is 7 kg.
To reduce energy consumption, use lower temperature settings, wash with full loads, and select eco-friendly programs when available.
Locate the filter at the bottom front of the machine. Open the cover, unscrew the filter cap, and remove any debris. Rinse the filter under running water and reassemble.
Ensure the machine is level by adjusting the feet. Also, check that the load is evenly distributed inside the drum.
After selecting your program, press the delay start button until the desired time delay is set. The machine will start after the set delay time has elapsed.
Regularly clean the detergent drawer, filter, and door seal. Avoid overloading the machine and periodically run a maintenance wash with a drum cleaner.
Run an empty hot wash cycle with a cup of white vinegar or a washing machine cleaner to eliminate odors. Ensure the door is left open after washes to allow the interior to dry.