Beko WTIK74111 User Manual
![Beko WTIK74111 manual cover](/images/CytOWEozfcowUOZlbfVIsLaE/thumbs/thumb175x175.webp)
To start a wash cycle, ensure the machine is plugged in, load your laundry, add detergent, select the desired program using the control dial, and press the start button.
Check if the machine is properly plugged in, the door is closed securely, and the water supply is turned on. Ensure the program has been selected and the start button is pressed.
Remove the detergent drawer by pulling it out and pressing down on the release lever. Wash it with warm water to remove any detergent residue and reinsert it after drying.
Regularly clean the detergent drawer, check and clean the filter, and run a maintenance wash with a drum cleaner to prevent build-up.
Ensure the drain hose is not kinked or clogged. Check the pump filter for blockages and make sure the drainage system is functioning correctly.
Ensure the machine is level and that all transit bolts have been removed. Check that the load is balanced and not overfilled.
Use lower temperature settings, utilize full load capacities, and select eco-friendly programs to reduce energy usage.
Leave the door open after washes to allow the drum to dry out, regularly clean the detergent drawer and the door seal, and run a monthly maintenance wash.
Ensure there are no obstructions preventing the door from closing properly and check for damage to the door latch. Press firmly on the door until it clicks shut.
Run an empty hot wash with a drum cleaner or vinegar to eliminate odors, clean the door seal and detergent drawer, and leave the door open between washes.