Beko WTIK72151 User Manual
![Beko WTIK72151 manual cover](/images/PQFpnICOouRtTEgaQBLqGcPE/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Add the appropriate detergent in the detergent drawer. Select the desired wash program using the program knob, then press the start/pause button to begin the cycle.
If the machine is not draining, check the drain hose for any blockages or kinks. Ensure the pump filter is clean by opening the filter cover and cleaning out any debris. If the problem persists, contact a service technician.
To clean the detergent drawer, pull it out gently until it stops. Press down on the release latch and remove the drawer completely. Wash it under warm water to remove any detergent residue. Dry thoroughly before reinserting.
Excessive vibration may be due to an unbalanced load. Try redistributing the clothes evenly in the drum. Ensure the machine is level on the floor. If the problem continues, check if the transit bolts have been removed if the machine is newly installed.
To reset the washing machine, turn the program knob to the 'Off' position. Wait a few seconds, then select your desired program and press the start/pause button. This should reset the machine.
Regular maintenance includes cleaning the detergent drawer, checking and cleaning the pump filter monthly, and running an empty hot wash with a washing machine cleaner to remove limescale and detergent build-up.
To prevent mold and odors, leave the door slightly open after each wash to allow air circulation. Regularly clean the drum and door seal with a damp cloth. Use a washing machine cleaner every few months.
Common error codes include E01 (door not closed properly), E02 (water supply problem), and E03 (drainage issue). Refer to the user manual for a full list of error codes and solutions.
Yes, the Beko WTIK72151 has a 'Delicate' wash program specifically designed for delicate fabrics. Ensure to follow the care label instructions on your garments.
To adjust the spin speed, select your desired wash program first. Then, press the spin speed button to select the desired speed. The display will show the selected spin speed.