Beko WTIK72111 User Manual
![Beko WTIK72111 manual cover](/images/OginVOzewCOCFdIBtnWFjjsq/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent to the appropriate compartment, select the desired program using the program dial, and press the start/pause button.
If your washing machine is not draining, check for blockages in the drain hose or pump filter. Ensure the drain hose is not kinked and clean the filter if necessary.
Remove the detergent drawer by pulling it out gently. Clean it under running water to remove any residue and use a soft brush if needed. Reinsert it once it's completely dry.
Error code E10 indicates a water inlet problem. Check that the water supply is turned on and that the inlet hose is not kinked or blocked.
It's recommended to clean the drum every 1-3 months. Run an empty hot wash cycle with a drum cleaning detergent to maintain hygiene and prevent odors.
Yes, you can pause a wash cycle by pressing the start/pause button. To resume the cycle, simply press the button again.
Excessive vibration may be due to an unbalanced load. Ensure the washing machine is level and redistribute the laundry evenly in the drum.
To reset the washing machine, unplug it from the power source for a few minutes and then plug it back in. This will reset the electronic system.
Yes, the Beko WTIK72111 has a specific wool program designed to gently wash wool garments. Always check the clothing label for washing instructions.
Regularly clean the detergent drawer, drum, and filter. Ensure the machine is level and check hoses for wear and tear. Conduct monthly drum cleaning cycles.