Beko WEC840522W User Manual
![Beko WEC840522W manual cover](/images/uaIPdWxEuDIorIIbyySpRBcr/thumbs/thumb175x175.webp)
To start a wash cycle, first load your laundry into the drum. Then, add detergent to the appropriate compartment in the detergent drawer. Select your desired wash program using the program selector dial. Finally, press the start/pause button to begin the wash cycle.
If the washer is not draining, check the drain hose for kinks or blockages. Ensure the drain pump filter is clean and free of debris. Also, verify that the drain hose is positioned at the correct height, between 40-100 cm from the ground.
To clean the detergent drawer, remove it by pulling it out and pressing down on the release latch. Rinse the drawer under warm water to remove any detergent residue. Use a brush to clean the compartments if necessary. Once clean, slide the drawer back into place.
Excessive vibration may be due to an unbalanced load. Ensure the laundry is evenly distributed in the drum. Check that the washer is level by adjusting its feet. Avoid washing single heavy items that can cause imbalance.
Regular maintenance includes cleaning the drum, detergent drawer, and filter. Run a monthly drum clean cycle using a drum cleaner or vinegar. Clean the filter regularly to prevent blockages. Ensure the exterior is wiped down to keep it clean.
Ensure the washer is plugged in and the power outlet is working. Check that the door is closed securely, as the washer will not start if the door is not properly latched. Verify that the water supply is turned on. If the problem persists, consult the user manual or contact customer support.
Run a hot water cycle with a washing machine cleaner or vinegar to eliminate odors. Ensure you leave the door open after each wash to allow the drum to dry and prevent mold growth. Clean the rubber door gasket regularly to remove trapped moisture and lint.
Yes, you can pause a wash cycle by pressing the start/pause button. Once paused, you can open the door to add or remove items, provided the water level is not too high or the temperature too hot. Press the start/pause button again to resume the cycle.
To prevent mold and mildew, leave the door and detergent drawer open after each wash to allow air circulation. Regularly clean the drum and door gasket with a mild detergent or vinegar. Use the appropriate amount of detergent to avoid residue build-up.
Refer to the user manual to identify the error code and its meaning. Follow the troubleshooting steps provided for the specific error. If you cannot resolve the issue, contact Beko customer service for further assistance.