Beko WDL742431W User Manual

Ensure the machine is plugged in and the water supply is turned on. Load your laundry, add detergent, close the door, select the desired wash program using the control panel, and press the start button.
Check if the drain hose is kinked or blocked. Make sure the pump filter is clean and not clogged. Refer to the user manual for detailed steps on cleaning the pump filter.
Ensure the washing machine is on a level surface. Check that the transit bolts have been removed. Avoid overloading the machine and distribute laundry evenly.
Regularly clean the detergent drawer and the door seal to prevent mold. Check and clean the pump filter monthly. Run a maintenance wash with a washing machine cleaner or vinegar to keep the drum fresh.
Ensure the door is properly closed. Check if the power cord is plugged in and the socket is switched on. Verify that the water supply is connected and the inlet valve is open.
Yes, use the 'Delicate' or 'Hand Wash' program designed for gentle washing. Use a mild detergent and wash at a lower temperature to protect delicate fabrics.
Error code E18 indicates a water drainage issue. Check the drain hose and pump filter for blockages. If the problem persists, contact a service technician.
Ensure the appliance is level using a spirit level. Adjust the feet if necessary. Avoid overloading and ensure laundry is evenly distributed inside the drum.
Remove the detergent drawer by pulling it out and pressing down on the release catch. Rinse it under warm water to remove any detergent residue or mold, then dry thoroughly before reinserting.
Yes, you can use fabric softener. Add it to the designated compartment in the detergent drawer. Follow the manufacturer's instructions regarding the amount to use.