Beko KDG581W User Manual
![Beko KDG581W manual cover](/images/oTRInDMewwsxwImPHuKJKBKG/thumbs/thumb175x175.webp)
To ignite the oven, turn the oven control knob to the desired temperature while pressing the ignition button. Hold the button for a few seconds until the burner lights up.
First, ensure that the oven is properly connected to the power supply. Check if the gas supply is turned on. If the problem persists, it may be a faulty thermostat or igniter, which should be checked by a professional technician.
Remove the burner caps and soak them in warm soapy water. Use a soft brush to clean any debris. Ensure they are completely dry before reassembling. Avoid using abrasive materials.
Regularly clean the grill pan and grid after each use. Avoid using metal scouring pads. Check for any blockages in the grill burner holes and clean with a soft brush if necessary.
Turn the timer knob to the desired time. The timer will countdown and signal with a sound once the set time has elapsed.
If a gas smell is detected, immediately turn off the cooker and ventilate the area. Check all connections for leaks. If the smell persists, contact a professional technician for assistance.
Preheat the oven only when necessary, use the right size cookware for the burners, and ensure the oven door seal is intact to prevent heat loss.
Inspect the door hinges and seals for any obstructions or damage. If necessary, tighten any loose screws or replace faulty parts.
Yes, the Beko KDG581W can be converted to LPG gas. This should be done by a qualified technician using the appropriate conversion kit.
Use a mixture of baking soda and water to create a paste. Apply it to the glass and leave it for 15 minutes, then wipe clean with a damp cloth. Avoid using harsh chemicals.