Beko ICQFVD373 User Manual

To defrost the Beko ICQFVD373, first unplug the appliance. Remove all food items and store them in a cool place. Leave the freezer door open to allow the ice to melt naturally. Once the ice has melted, clean the interior with a soft cloth and a mild detergent. Dry thoroughly before plugging back in.
Check if the freezer door is closing properly and not obstructed. Ensure the temperature setting is correct and the vents are not blocked. If the issue persists, inspect the door seal for damage or wear and consider contacting a professional technician.
Locate the temperature control panel inside the refrigerator. Adjust the settings using the control dial or digital controls, depending on your model. Refer to the user manual for specific instructions on your model.
Water pooling could be due to a blocked defrost drain. Try clearing the drain hole using a pipe cleaner or similar tool. Ensure the fridge is level so that water can drain properly.
Regularly clean the condenser coils at the back of the appliance to improve efficiency. Check and clean door seals to ensure they are airtight. Also, periodically defrost the freezer as necessary and clean the interior.
First, unplug the refrigerator. Locate the light cover inside the fridge, usually at the top. Remove the cover and unscrew the old bulb. Replace it with a new bulb of the same type and wattage. Reattach the cover and plug the appliance back in.
Unusual noises may be due to the appliance not being level, causing vibrations. Check that the refrigerator is stable and adjust the feet if necessary. Also, check for any loose items on top or inside that might be vibrating.
Ensure the fridge is not overfilled to allow air circulation. Keep the condenser coils clean and ensure the door seals are intact. Set the temperature to the recommended settings and avoid placing hot food directly inside.
Check for obstructions that might prevent the door from closing. Inspect the door gasket for any damage or dirt and clean or replace it if necessary. Ensure the refrigerator is level as misalignment can cause door closure issues.
Yes, the door swing can be reversed. Refer to the user manual for detailed instructions. Typically, this involves unscrewing the hinges and repositioning them on the opposite side. Ensure all screws are tightened securely after reversing the door.