Beko HCF 61620 X User Manual
![Beko HCF 61620 X manual cover](/images/KBapAbbuxeEzPqzKuZVOynDK/thumbs/thumb175x175.webp)
To clean the filters, first ensure the cooker hood is turned off and unplugged. Remove the filters and wash them with warm soapy water or in a dishwasher. Allow them to dry completely before reinstalling.
Check if the filters are clean and not blocked. Ensure the ducting system is correctly installed and not obstructed. If the problem persists, contact a qualified technician.
Ensure the appliance is turned off and unplugged. Gently remove the light cover and replace the bulb with one of the same type and wattage. Reattach the cover securely.
Unusual noises may indicate loose parts or obstructions. Check for loose screws and ensure the filters are properly seated. If the noise continues, consult a technician.
Yes, the Beko HCF 61620 X can be used in recirculation mode by installing a carbon filter to filter and recirculate the air back into the kitchen.
Carbon filters should be replaced every 3 to 6 months, depending on usage frequency and cooking habits, to maintain optimal performance.
Regularly clean the filters every month, replace carbon filters every 3-6 months, and check for any loose or worn parts periodically.
Unplug the appliance from the power source, wait for a few minutes, and plug it back in. This should reset the controls.
Flexible or rigid ducting with a diameter of 150mm is recommended for optimal extraction performance. Minimize bends and length to reduce airflow resistance.
Follow the installation instructions provided in the manual. Ensure the hood is mounted at the correct height above the hob, and securely fasten it to the wall. Consult a professional if needed.