Beko DVS05C20W User Manual

Pages 45

Year 2020

Language(s)

of 45

Beko DVS05C20W Specification

The Beko DVS05C20W is a freestanding dishwasher designed with efficiency and practicality in mind, making it an ideal choice for modern households. With a compact width of 45 cm, it provides a space-saving solution without compromising on performance. This model features a capacity to hold up to 10 place settings, suitable for small to medium-sized families. It operates with an energy efficiency rating of E, aligning with contemporary environmental standards while helping to reduce electricity consumption. The DVS05C20W includes five main wash programs, offering versatility to accommodate various dishwashing needs, from intensive to eco-friendly cycles.

The dishwasher is equipped with a ProSmart Inverter Motor, which enhances its durability and efficiency, and reduces noise levels, making it quieter during operation. It also features a half-load function, allowing users to wash smaller loads without wasting water or energy. The inclusion of a quick program ensures that dishes can be cleaned in a shorter time frame, providing added convenience for busy households. The DVS05C20W is designed with a simple, user-friendly control panel that facilitates easy program selection and monitoring.

Additionally, it incorporates a delay start timer, enabling users to schedule wash cycles to begin at a more convenient time, and an adjustable upper basket to accommodate larger items in the lower section. With its sleek white exterior, the Beko DVS05C20W not only performs efficiently but also integrates seamlessly into various kitchen decors. Overall, the Beko DVS05C20W offers a balanced combination of functionality, efficiency, and style, making it a reliable choice for those seeking a compact and effective dishwashing solution.

Beko DVS05C20W F.A.Q.

How do I reset the Beko DVS05C20W dishwasher?

To reset the Beko DVS05C20W dishwasher, press and hold the start button for 3 seconds until the machine beeps, indicating that it has been reset.

What should I do if the dishwasher is not draining properly?

Check for clogs in the drain hose and filters. Ensure the drain hose is not kinked and is installed at the correct height. Clean the filters and check the pump for blockages.

How can I clean the filters on my Beko DVS05C20W?

Remove the bottom rack, twist the filter unit counterclockwise, and lift it out. Rinse the filter under running water and remove any trapped debris before reinstalling.

Why is my Beko dishwasher leaving dishes wet?

Ensure that the rinse aid dispenser is filled. Check that the selected program includes a drying phase. Avoid overloading the dishwasher, which can prevent proper drying.

What maintenance should be performed regularly on the Beko DVS05C20W?

Regularly clean the filters and spray arms, check and clean the door seals, and ensure that the rinse aid and detergent dispensers are functioning properly.

How can I troubleshoot a dishwasher that won't start?

Ensure the dishwasher is properly plugged in and that the circuit breaker hasn't tripped. Check the door latch to ensure it is closed securely and inspect the control panel for errors.

Can I use any type of detergent in the Beko DVS05C20W?

It is recommended to use dishwasher-specific detergents in either powder, liquid, or tablet form. Avoid using regular dish soap as it can cause excessive sudsing.

Why is my dishwasher making unusual noises during operation?

Unusual noises can be caused by items knocking against each other or the spray arms. Ensure dishes are properly loaded and check that spray arms are not obstructed.

What should I do if the dishwasher is not cleaning dishes properly?

Make sure the spray arms are not clogged, and clean the filters. Ensure that dishes are loaded correctly and not blocking the spray arms. Use the appropriate amount of detergent.

How do I adjust the water hardness setting on my Beko dishwasher?

Refer to the user manual to access the settings menu. Adjust the water hardness level according to the local water supply's hardness, typically done via the control panel.