Beko DVS04X20W User Manual
![Beko DVS04X20W manual cover](/images/hkHkZSctlfNprsEtPnihucaH/thumbs/thumb175x175.webp)
To reset the Beko DVS04X20W dishwasher, press and hold the start button for about 3 seconds until the lights blink. This indicates that the reset is complete.
Check the drain hose for any blockages or kinks, and ensure that the filter is clean. If the issue persists, inspect the pump for any obstructions.
It is recommended to clean the filter once a week to ensure optimal performance and prevent any blockages.
Yes, you can use tablet detergents in the Beko DVS04X20W. Ensure that the tablet fits in the detergent dispenser and follow the manufacturer's instructions.
Use only dishwasher-specific salt to prevent any damage to the dishwasher's softener unit and to ensure effective performance.
Open the rinse aid compartment and turn the dosage regulator to the desired setting, usually between 1 and 6. Higher numbers dispense more rinse aid.
Unusual noises could be due to items in the dishwasher touching each other or the spray arms. Ensure items are loaded properly and check for any obstructions in the spray arms.
Error code E01 usually indicates a water inlet problem. Check that the water supply is turned on and the inlet hose is not kinked or blocked.
Ensure that you are using the correct amount of detergent and that the rinse aid is filled. Adjust the water softener settings if you have hard water.
Check that the dishwasher is properly plugged in, the door is closed securely, and the water supply is connected. Also, ensure that the child lock is not activated.