Beko CXFG3601VW User Manual

To change the temperature setting, locate the thermostat control inside the refrigerator compartment. Turn the dial to adjust the temperature. Typically, setting it to a middle level ensures optimal cooling.
Ensure that the refrigerator is plugged in and the power is on. Check if the thermostat is set to the correct temperature. Additionally, ensure that the door seals are clean and not damaged, and that the refrigerator is not overloaded with items blocking airflow.
To defrost the freezer, remove all items and unplug the appliance. Leave the freezer door open to allow the ice to melt naturally. Place towels around the base to catch any water. Once defrosted, clean the interior and restart the appliance.
Water pooling can be caused by a blocked defrost drain. Check and clear any blockages in the drain located at the back of the fridge compartment. Additionally, ensure the door seals are intact to prevent moisture build-up.
It is recommended to clean the condenser coils every 6 months. This helps maintain efficient operation and prolongs the life of the refrigerator. Use a vacuum or a soft brush to remove dust and debris.
Store food in a way that allows air to circulate freely. Avoid overcrowding shelves, and keep frequently used items at the front. Ensure that the fridge and freezer compartments are not overfilled.
Unplug the refrigerator for safety. Locate the light cover inside the fridge, typically at the top. Remove the cover, unscrew the old bulb, and replace it with a new one of the same type and wattage. Reattach the cover and plug the refrigerator back in.
Unusual noises can be due to the appliance not being level, items inside vibrating, or the compressor operating. Ensure that the fridge stands level, and check that nothing is touching the walls of the interior. Some noises are normal during operation.
To improve energy efficiency, ensure that the door seals are in good condition, and avoid leaving the doors open unnecessarily. Keep the refrigerator away from heat sources and ensure it is not overfilled to allow proper air circulation.
If the door seal is damaged, it should be replaced to maintain efficient cooling. Purchase a compatible replacement seal, remove the old seal by pulling it away from the door, and press the new seal into place starting from the corners.