Beko CXFG1691A User Manual

To set the temperature on your Beko CXFG1691A, locate the temperature control dial inside the fridge compartment. Adjust the dial to your desired temperature setting, typically between 3°C and 5°C for the fridge, and -18°C for the freezer.
First, check if the freezer door is fully closed and the seals are intact. Ensure the temperature setting is correct. If the issue persists, defrost the freezer to remove any ice build-up and ensure proper airflow. If the problem continues, contact a service technician.
It is recommended to defrost your Beko CXFG1691A freezer once or twice a year, or whenever the ice build-up reaches about 6mm (1/4 inch) thick.
Unusual noises can be caused by various factors such as the fridge not being level, items inside vibrating, or a faulty fan motor. Ensure the refrigerator is on a level surface and check for loose items inside. If the noise persists, it may require professional inspection.
To improve energy efficiency, ensure the fridge and freezer doors are sealed tightly, avoid placing hot food inside, and maintain a consistent temperature setting. Also, make sure the appliance is located away from direct sunlight and heat sources.
Clean the Beko CXFG1691A every few months by unplugging it and wiping down the interior with a mild detergent and warm water. Remove shelves and drawers for thorough cleaning. Ensure everything is dry before reassembling.
To change the light bulb, first unplug the appliance. Locate the light cover inside the fridge, remove it, and unscrew the old bulb. Replace it with a new bulb of the same type and wattage, then reattach the cover.
Check if the defrost drain is blocked. If so, clear any debris. Ensure the appliance is level to prevent water overflow from the defrost pan. If the issue continues, inspect the door seals for damage or contact a technician.
To prevent ice build-up, ensure the door seals are tight and not damaged, avoid leaving the door open for extended periods, and defrost regularly if you notice significant ice accumulation.
When transporting the Beko CXFG1691A, keep it upright to prevent compressor oil from leaking into the cooling coils. Secure the doors with tape and protect the appliance with padding to avoid damage during transit.