Beko CCFM1552W User Manual

To adjust the temperature settings, locate the thermostat control dial inside the fridge compartment and turn it to the desired setting. The dial typically ranges from 1 (warmest) to 5 (coldest).
Unusual noises may occur if the appliance is not level or if items inside are vibrating against each other. Ensure the fridge is on a flat surface and check that the contents are not causing the noise.
The freezer should be defrosted whenever the ice build-up reaches about 3-4 mm. This typically occurs every few months, depending on usage.
Check if the door is fully closed, the temperature setting is correct, and that the vents are not blocked. If the issue persists, consult the user manual or contact customer support.
Yes, the door swing can be reversed. Refer to the manual for step-by-step instructions or contact a professional technician for assistance.
First, unplug the unit from the power source. Locate the condenser coils (usually at the back or bottom of the fridge) and use a vacuum cleaner or a soft brush to remove dust and debris.
The Beko CCFM1552W has an energy efficiency rating of F under the new EU energy label system. It is recommended to check the manual for energy-saving tips.
To replace the bulb, first unplug the appliance. Remove the light cover inside the fridge, unscrew the old bulb, and replace it with a new one of the same type and wattage.
Inspect the seal for visible damage or dirt. If damaged, replace it with a new seal from a Beko authorized dealer. Ensure the door is properly aligned to avoid further issues.
When moving the appliance, keep it upright and secure the doors with tape. If transporting over long distances, use protective packaging to prevent damage.