Beko B5W5841AW User Manual
![Beko B5W5841AW manual cover](/images/xwZAiNnHiaCKZmMnToysEkfN/thumbs/thumb175x175.webp)
To start a wash cycle, load your laundry into the drum, add detergent, close the door, select the desired program using the control dial, and press the start button.
Check if the water tap is turned on, ensure the water inlet hose is not kinked or blocked, and verify that the water supply is adequate. Also, inspect the filter for any blockages.
Remove the detergent drawer by pulling it out gently. Wash it under warm water to remove any detergent build-up, then dry it thoroughly before reinserting.
Ensure the washing machine is level by adjusting the feet. Also, check that the load is balanced and not too heavy. Avoid washing a single heavy item.
It is recommended to clean the filter every month to maintain optimal performance and prevent blockages.
Regularly clean the detergent drawer and filter, check and clean the door seal, and run a maintenance wash with a washing machine cleaner at least once a month.
Run an empty hot water cycle with a cup of white vinegar or a washing machine cleaner to eliminate odors. Ensure the door is left ajar between washes to allow air circulation.
The E02 error code typically indicates a problem with the water filling. Check the water supply, inlet hose, and ensure the tap is fully open.
Yes, the Beko B5W5841AW has a specific wool program designed to handle woolen garments gently. Always follow the care label instructions on your clothing.
Leave the door and detergent drawer open after each wash to allow moisture to escape, periodically clean the door seal, and run a monthly maintenance wash with a washing machine cleaner.