Bajaj Pulsar NS200 Owner's Manual

Regular maintenance of the Bajaj Pulsar NS200 includes timely oil changes, checking and cleaning the air filter, maintaining proper tire pressure, inspecting the brake system, and ensuring the chain is lubricated and properly tensioned.
First, check the battery charge and connections. Ensure the fuel supply is adequate and the fuel switch is on. Inspect the spark plug for fouling and replace if necessary. If the issue persists, consult a professional mechanic.
To improve fuel efficiency, maintain steady speeds, avoid unnecessary idling, ensure the tire pressure is at recommended levels, and perform regular maintenance like timely oil changes and air filter cleaning.
The recommended tire pressure for the Bajaj Pulsar NS200 is typically 28 PSI for the front tire and 32 PSI for the rear tire, but always refer to the owner's manual for the most accurate information.
It is recommended to change the engine oil every 3,000 to 4,000 kilometers or every 6 months, whichever comes first, to ensure optimal engine performance.
Excessive vibrations in the Bajaj Pulsar NS200 could be due to unbalanced tires, loose engine mounting bolts, worn-out shock absorbers, or issues with the chain and sprockets. A thorough inspection is advised to identify the exact cause.
To adjust the chain tension, loosen the rear axle nut, adjust the chain tensioner bolts evenly on both sides until the chain has about 25-35mm of slack, then retighten the axle nut. Ensure the wheel alignment is correct.
Clean the chain with a suitable chain cleaner and a soft brush, then dry it completely. Apply a quality chain lubricant evenly while rotating the wheel to ensure full coverage. Avoid over-lubrication to prevent dirt accumulation.
For electrical issues, check the battery charge and connections, inspect fuses, and examine wiring for damage or corrosion. If problems persist, consult with a professional mechanic or service center.
Common signs include unusual noises, decreased fuel efficiency, difficulty in starting, poor throttle response, and excessive vibrations. Regular servicing ensures these issues are addressed timely.