Ariens 935 Series 935002 Service Manual

Ensure the tractor is in neutral, engage the brake, turn the ignition key to the start position, and release once the engine starts.
Use unleaded gasoline with an octane rating of 87 or higher. Avoid using ethanol-blended fuels above E10.
Change the oil after the first 5 hours of use, then every 25-50 hours of operation, or at the start of each season.
The recommended tire pressure is typically 10 PSI for the front tires and 12 PSI for the rear tires. Check the owner’s manual for specific details.
Check the battery connections, ensure there is fuel in the tank, inspect the spark plug for wear, and verify the safety switches are engaged.
Clean the tractor, change the oil, add a fuel stabilizer, remove the battery, and store it in a dry place.
Disconnect the spark plug, raise the tractor deck, remove the blade bolt, replace the blade, and secure with the bolt. Always wear gloves when handling blades.
Stop the engine immediately, check the coolant level if applicable, ensure the radiator is clear of debris, and inspect the fan belt for damage.
Locate the cutting height adjustment lever on the tractor and move it to the desired position. Ensure both sides are adjusted equally for an even cut.
Regularly check the battery terminals for corrosion, ensure it is charged, and refill with distilled water if it's a non-sealed battery.