Acura MDX 2013 Owner's Manual
![Acura MDX 2013 SUV manual cover](/images/hBrYfzTlBUyfhmTPryaZpGbR/thumbs/thumb175x175.webp)
To reset the oil life indicator, turn on the ignition without starting the engine. Use the multi-information display to navigate to the 'Oil Life' screen. Hold down the 'Select/Reset' button until the oil life starts to blink, then release. Hold the button again until the oil life resets to 100%.
The recommended tire pressure for the Acura MDX 2013 is 32 psi for both the front and rear tires. Always check the tire pressure when the tires are cold for an accurate reading.
To pair your phone, enable Bluetooth on your device. Press the 'Phone' button on the audio system, then select 'Yes' and 'Pair' when prompted. On your phone, select the Acura HandsFreeLink option and confirm the pairing code.
The Acura MDX 2013 requires 5W-20 viscosity, API service grade SM or SN engine oil. For optimal performance, it's recommended to use Acura genuine motor oil or an equivalent high-quality oil.
To replace the cabin air filter, open the glove box and remove any contents. Unclip the damper on the right side, then squeeze the sides of the glove box to drop it down. Remove the filter cover and replace the old filter with a new one, ensuring it is oriented correctly.
The check engine light can be triggered by a variety of issues, including a loose gas cap, faulty oxygen sensor, or problems with the catalytic converter. It's advised to check for any diagnostic trouble codes using an OBD-II scanner for a precise diagnosis.
To adjust the headlights, park on a level surface facing a wall 25 feet away. Measure the height from the ground to the center of the headlight and mark this on the wall. Use the adjustment screws behind the headlight assembly to align the beam with the marks.
The Acura MDX 2013 has a towing capacity of up to 5,000 pounds when properly equipped with the towing package, which includes a transmission cooler and heavy-duty power steering cooler.
To check the transmission fluid, ensure the vehicle is on a level surface and the engine is warm. Locate the dipstick near the transmission and remove it. Wipe it clean, reinsert it, and then remove again to check the fluid level, ensuring it is within the marked range.
If a power window is not working, first check the window lock switch and ensure it is not engaged. Then check the fuse related to the power windows. If the fuse is intact, the issue could be with the window motor or switch, which may require professional diagnosis.